The velcro panel anchor is factory installed. The wall anchor is a self adhesive strip which is supplied to contractor. The wall surface must be properly cleaned before mounting the velcro strip.
***The surface area must be free of wax or grease by using an alcohol based solvent.
The panel anchoring is installed, to the reinforced sections of the surface, at the plant. This procedure ensures a high quality bond to the panel and zero defects. The wall anchoring section must be installed at the premises.
Galvanized steel fixtures (caliber 20).
Dimension of the panel anchoring: 50 mm. X 50 mm. (2 in. X 2 in.)
Dimension of the wall anchoring: 50 mm. X 127 mm. (2 in. X 5 in.)
Application of adhesives should be applied within the specifications recommended by Acco Inc. Adhesives used by the construction trade, may be supplied by your contractor.